ECI-B64Z2 Quick Start Guide
QSG ECI-B64Z2 041018NA
1
2
Installation
Make sure of the following before you start:
●
The device included in the package is in good condition and all required parts are
included.
●
The standard power supply is 12 VDC or PoE (802.3af), and must be consistent with
camera requirements.
●
Equipment is powered-off during installation.
●
The installation environment is correct.
●
The wall or ceiling is strong enough to withstand four times the weight of the camera
and mount.
For IR cameras, take the following precautions in order to prevent IR reflection:
●
Make sure that there is no reflective surface that is too close to the camera lens. The IR
light from the camera may reflect back into the lens, which may cause reflection.
2.1
Memory Card Installation
Note:
A microSD memory card is not included with the camera. You will need to purchase one
separately.
This series of cameras supports memory card installation. Different camera types share
similar installation steps, and we used the type II camera as an example here.
Steps:
1.
Loosen the lock screw to remove the sun shield.
D C
1
2
V
IN
Lock Screw
Remove the Sun Shield
Figure 2-1
2.
Rotate the front cover counterclockwise in order to remove it.
D C
1
2
V
IN
Remove the Front Cover
Figure 2-2
3.
Insert the memory card into the memory card slot.
