Network PTZ Camera
·
Quick Start Guide
39
3.
Fix the camera on the wall by knocking the expansion screws into
the wall through the bracket, as shown in Figure 2-57.
Figure 2-57
Install the Wall-mounted PTZ Bullet Camera
Notes:
To install the PTZ bullet camera with the pole, you can use
hexagon socket screws instead of the expansion screws.
Water-proof treatment is required for cable connectors. Refer
to section 2.9 and 2.10 for details.
2.6.3
Base Mounting
Before you start:
Base-mounted PTZ bullet camera can be installed on hard plane
structures such as cement surface.
Note:
Make sure that the plane structure is strong enough to withstand
more than eight times the weight of the PTZ camera and its
accessories.
Steps:
