2. Install the Detector
Stand Mounting
Place the detecor on the floor.
Wall mounting
1. Secure the mounting plate on the wall with supplied screws or sponge tape.
2. Rotate and secure the device body on the mounting plate.
Note: To make the TAMPER work properly, the thickness of the sponge tape should be no more than 1mm.
3
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
4
Test
Stand mounting test
: Water on the probe of the detector. If the alarm is triggered, the LED keeps blue for 2 s.
Wall mounting test:
1.
Connect the probe with the detetcor.
2. Put the probe into a cup of water. If the alarm is triggered, the LED keeps blue for 2 s.
…
a.
b.
Screw Mounting
Sponge tape mounting