HIKVISION DS-PDPG8P-EG2-WE, Руководство пользователя, Страница: 6 / 6

7
Specification
6
Operation Caution and Device Maintenance
- All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention
regulations and other related regulations in your local region.
- Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation.
Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment
damage).
- Please make sure that the power has been disconnected before you wire, install or dismantle the device.
- If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then
please contact the service center.
- Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation.
Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment
damage).
- Do not place the device in extremely hot (refer to the specification of the device for the detailed operation
temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation.
- The device for indoor use shall be kept from rain and moisture.
Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden
(ignorance can cause fire danger).
- Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not
a malfunction however), and affecting the endurance of sensor at the same time.
- Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or
equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufactur-
er.
- Do not expose the device to the corrosive gas. Otherwise the equipment damage may occur.
- Do not expose the device to the explosive situation.
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
5
Formatting
Hold the tamper switch for 8 s and power the device on at the same time. The red LED flashes 3 times when the formatting
operation is completed.
6
Detec ti on range 12 m ， 8 5 . 9°
Detec ti on s p eed 0. 3 ~ 2 m/ s
Auto sensi ti vity Y es
P et i mm unity Up to 3 0 K g ( Height ＜ 4 0c m)
Digital te mp erature co mp ensa ti on Y es
Technology Digital m icro p rocessor based
S ealed o pti cs Y es
Cree p zone p rotec ti on Y es
Direct light fi lter 65 00lu x
S ensor Om nidirec ti onal electret m icro p hone
Detec ti on range 8 m radius
G lass ty p e F loat, P late, Te mp ered, W ired, La m inated Leaded, Double glazing
G lass thickness 2. 4mm to 6 . 4mm
G lass size 0. 3m x 0. 3m to 3m x 3m
S ensi ti vity Low ( 1 m) , m ediu m (4m) , and high ( 8 m)
Ta mp er p rotec ti on F ront & B ack
L E D indicator G reen (PIR) , R ed (BG) , B lue ( alar m)
E nca p sulated p las ti c Y es
Op era ti ng te mp erature
- 10 ° C to 55 ° C ( 1 4 °F to 1 3 1 °F)
- 10 ° C to 4 0 ° C ( 1 4 °F to 10 4 °F) Cer tifi ed
S torage te mp erature - 20 ° C to 6 0 ° C (-4 °F to 1 4 0 °F)
Op era ti ng hu m idity 10% to 9 0%
I nstalla ti on height 1.8 to 2. 4m
Di m ension (W × H × D ) 65 . 5mm × 10 3mm × 4 8. 5mm
W eight 1 34 g
B racket Opti onal wall & ceiling accessory
W ireless technology Tri -X W ireless Technology
E nviron m ent te mp erature I ndicator Y es
2 - way wireless co mm unica ti on Y es
Trans m ission f re q uency 8 6 8MHz
F re q uency ho pp ing Mul ti channel trans m iss ti on
Trans m ission encry pti on A ES- 128 encry pti on
S ignal strength indicators Y es
RF range 1. 6Km (f ree s p ace )
E nrolling m ethods P ower u p , R e m ote I D, QR code
B a tt ery C R 12 3 A x 2 ( included )
S tandard ba tt ery li f e 5 years
G lass B reak Sp eci fi ca ti on
PIR Sp eci fi ca ti on