HIKVISION DS-KH6320-WTE1, Инструкция по установке и быстрому запуску, Страница: 9 / 15

Before You Start
Note
•
Make sure the device in the package is in good condition and all the assembly
parts are included.
•
The power supply the indoor station supports is 12 VDC. Please make sure your
power supply matches your indoor station.
•
Make sure all the related equipment is power-off during the installation.
•
Check the product specification for the installation environment.
Steps
1.
Chisel a hole in the wall. The size of the hole should be 76 mm (width) × 76 mm
(length) × 50 mm (depth).
2.
Insert the junction box to the hole chiseled on the wall.
3.
Fix the wall mounting plate to the junction box with 2 screws.
4.
Hook the indoor station to the wall mounting plate tightly by inserting the plate
hooks into the slots on the rear panel of the indoor station, during which the
lock catch will be locked automatically.
Figure 3-2 Wall ���� with ���� Box
Network Indoor Station Installation Guide
6