HIKVISION DS-KH6320-WTE1, Инструкция по установке и быстрому запуску, Страница: 12 / 15

1 ��� Started
1.1 ��ate Indoor St��
You can only configure and operate the indoor station after creating a password for
the device activation.
Steps
1.
Power on the device. It will enter the activation page automatically.
2.
Create a password and confirm it.
3.
Tap
OK
to activate the indoor station.
Note
We highly recommend you to create a strong password of your own choosing
(using a minimum of 8 characters, including at least three kinds of following
categories: upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security
system, resetting the password monthly or weekly can better protect your
product.
1.2 Quick Oper��
After device activation, the wizard page will pop up.
Steps
1.
Choose Language and tap
Next
.
2.
Set network parameters and tap
Next
-
Edit
Local IP
,
Subnet Mask
and
Gateway
parameters.
-
Enable
DHCP
, the device will get network parameters automatically.
Network Indoor Station Quick Start Guide
1