HIKVISION DS-KD-BK Скачать руководство пользователя страница 88 | Manualshive

Страница: 88 / 91

HIKVISION DS-KD-BK Скачать руководство пользователя страница 88

Video Intercom Module Door Station

·

User Manual

1.

In the Video Intercom page, click the Call Log tab to enter the Call Log page.
All the call logs will display on this page and you can check the log information, e.g.,
call status, start time, resident’s organization and name, device name and ring or
speaking duration.

2.

(Optional) Click the icon

in the Operation column to re-dial the resident.

3.

(Optional) Click the icon

in the Operation column to delete the call log.

Or you can click Clear at the upper right corner to clear all the logs.

6.2.4

Search Video Intercom Information

Purpose:
You can search the call logs between the iVMS-4200 client software and video intercom
devices, device unlocking logs and the sent notice information.
In the Access Control module, click icon

tab to open the Search page.

Search Call Logs

Steps:
1.

In the Information Search page, click the Call Log to enter the Call Log interface.

«
...
86
87
88
89
90
...
»

Содержание DS-KD-BK




























































































Отзывы:

Нет отзывов