HIKVISION DS-K5671-3XF Series, Руководство пользователя

Страница: 94 / 154

5. Click Save to enable the settings.
Set ISUP Parameters
Set the ISUP parameters for accessing device via ISUP protocol.
Steps
Note
The function should be supported by the device.
1. Click Configuration → Network → Advanced Settings → Platform .
2. Select ISUP from the platform access mode drop-down list.
3. Check Enable.
4. Set the ISUP version, server address, device ID, and the ISUP status.
Note
If you select 5.0 as the version, you should set the ISUP key as well.
5. Click Save.
Configure HTTP Listening
The device can send alarm information to the destination IP or host via HTTP protocol/HTTPS
protocol.
Before You Start
The destination IP or host name should support the HTTP protocol/HTTPS protocol to receive the
alarm information.
Note
The function should be supported by the device.
Steps
1. Click Configuration → Network → Advanced → HTTP Listening .
2. Edit the destination IP or host name, URL and port.
3. Optional: Click Test to test whether the entered IP address or host name are valid.
4. Optional: Click Default to reset the destination IP or host name.
5. Click Save.
8.5.13 Set Video and Audio Parameters
Set the image quality, resolution, and the device volume.
DS-K5671-3XF Series Face Recognition Terminal User Manual
80