HIKVISION DS-k1106, Руководство пользователя

Страница: 8 / 14

6
3.2 Definition of Cable
The description of 10 cables is shown below.
Table 3-3 Description of Cable
Color Description
Orange Red LED Control (available for Wiegand Protocol)
White Wiegand W1 (available for Wiegand Protocol)
Green Wiegand W0 (available for Wiegand Protocol)
Green RS-485-
Yellow RS-485+
Red PWR (+12 VDC)
Black GND
Gray TAMPER (available for Wiegand Protocol)
Purple Beep Control (available for Wiegand Protocol)
Brown
Green LED Control (available for Wiegand
Protocol)
3.3 Wiring Cables
Purpose:
Wire the cables between controller and card reader, thus to
establish the communication between them.
Steps for RS-485 communication mode:
1. Set the DIP switch of No. 6 as 0.
2. Set the DIP switch of No. 1 ~ 4 for RS-485 address and
reading card mode. For details, please refer to
3.1
Introduction for DIP Switch .
3. Wire the cable between controller and card reader as