HIKVISION DS-C10S-S**T Series Скачать руководство пользователя страница 27

                                                                           

- 22 - 

BPDU protection, root protection, and loopback protection 

QoS   

It supports speed limit on port direction and direction. 

Supports 8 priority queues per port. 

Support mapping from message 802.1p to different queues 

Support SP, WRR and SP+WRR algorithm 

Support for message priority and message redirection 

Support L2 (Layer 2) ~L4 (Layer 4) packet filtering function, provide source MAC address, 
destination  MAC  address,  source  IP  address,  destination  IP  address,  TCP/UDP  protocol 
source/destination port number, protocol, VLAN packet filtering function 

Support functions based on queue speed limit and port shaping. 

IPV6 

Support ND (Neighbor Discovery) 

Support PMTU 

Support Ipv6 Ping, Ipv6 Tracert, Ipv6 Telnet 

Support  ACL  based  on  source  Ipv6  address,  destination  Ipv6  address,  four  port,  protocol 
type, and so on. 

Support MLD v1/v2snooping (Multicast Listener Discovery snooping) 

Multicast 

Support IGMP v1/v2/v3 Snooping and fast leave mechanism 

Supporting multicast forwarding in VLAN and multicast multi VLAN replication 

Multicast load sharing supporting bundled ports 

Support controllable multicast 

Port based multicast traffic statistics 

Support IGMP v1/v2/v3, PIM-SM, PIM-DM, PIM-SSM 

Virtualization 

Support VSS virtualization technology 

Reliability 

Support STP (IEEE 802.1d), RSTP (IEEE 802.1w) and MSTP (IEEE 802.1s) protocol. 

Support EAPS (Ethernet loop protection protocol) and MEAPS (fast ring network protection 
protocol). 

Support FlexLinkLite tree topology protection mechanism to provide millisecond protection 
for primary and secondary links. 

Support BPDU protection, root protection and loopback protection. 

Security 

Support 802.1x, support single port maximum user number limit 

Storm suppression 

Filter 

Содержание DS-C10S-S**T Series






























Отзывы: