HIKVISION DS-C10S-S**T Series, Руководство пользователя, Страница: 18 / 29

- 13 -
3.3.2 Connecting 10GE Ethernet SFP+ Ports
ROUTE SWITCH switch has 8 10G SFP+ ports. Each port has its corresponding indicator:
TE1~TE8. You can connect the SFP+ optical module to the SFP+ port and then you can connect
other Ethernet terminal devices through the optical cable.
Figure 3-5 Connecting the 10GE SFP+ port and other Ethernet terminals
Caution: The figure shown above does not represent the material ROUTE SWITCH.
3.3.3 Connecting Gigabit Ethernet TX Ports
ROUTE SWITCH provides 24 10/100/1000 Base-T ports. Ports 1-24 are combo ports. Each
port has its corresponding indicator:1-4. The indicators are used to indicate the LINK/ACT state.
The ports can connect other Ethernet terminal devices through the UTP port and the
direct-through or cross network cable. The numbering order of the pins in the UTP port is the same
as that in the console port. See figure 3-7.