HIKVISION DS-9664NI-RH Series Скачать руководство пользователя страница 112

Страница: 112 / 211

User Manual of DS-9664NI-RH Series NVR

108

Figure 7.37 Result of Normal Video Search for Backup

Backup device management.

Press

New Folder

button if you want to create a new folder in the backup device.

Select a record file or folder in the backup device and press button

if you want to delete it.

Select a record file in the backup device and press button

to play it.

Press

Format

button to format the backup device.

Note:

If the inserted USB device is not recognized:

•

Click the

Refresh

button.

•

Reconnect device.

•

Check for compatibility from vendor.

Figure 7.38 USB Flash Drive Management

Management of USB writers and SATA writers

Enter Search Result interface of record files.

Menu>Export>Normal

Set search condition and press

Search

button to enter Search Result interface.

Note:

At least one channel shall be selected.

Содержание DS-9664NI-RH Series




















































































































































































































Результаты поиска

Содержание DS-9664NI-RH Series

Отзывы:

HIKVISION DS-9664NI-RH Series, Руководство пользователя, Страница: 112 / 211

Результаты поиска

Содержание DS-9664NI-RH Series

Отзывы: