HIKVISION DS-96000NI-I24 Скачать руководство пользователя страница 131

Страница: 131 / 241

Network Video Recorder User Manual

130

content settings. Up to 4 lanes are selectable.

Figure 9. 4

Rule Settings

Click

Save

to save the settings.

Please refer to the User Manual of Network Camera for the detailed instructions for the vehicle detection.

9.3

Line Crossing Detection

Purpose:

This function can be used for detecting people, vehicles and objects cross a set virtual line. The line crossing

direction can be set as bidirectional, from left to right or from right to left. And you can set the duration for the

alarm response actions, such as full screen monitoring, audible warning, etc.

Steps:

Enter the VCA settings interface.

Menu> Camera> VCA

Select the camera to configure the VCA.

You can click the checkbox of

Save VCA Picture

to save the captured pictures of VCA detection.

Select the VCA detection type to

Line Crossing Detection

Check the

Enable

checkbox to enable this function.

Click

to configure the trigger channel, arming schedule and linkage actions for the line crossing

detection alarm.

Click the

Rule Settings

button to set the line crossing detection rules.

Select the direction to A<->B, A->B or A<-B.

A<->B

: Only the arrow on the B side shows; when an object going across the configured line with both

direction can be detected and alarms are triggered.

A->B

: Only the object crossing the configured line from the A side to the B side can be detected.

B->A

: Only the object crossing the configured line from the B side to the A side can be detected.

Содержание DS-96000NI-I24


















































































































































































































































Результаты поиска

Содержание DS-96000NI-I24

Отзывы:

HIKVISION DS-96000NI-I24, Руководство пользователя, Страница: 131 / 241

Результаты поиска

Содержание DS-96000NI-I24

Отзывы: