HIKVISION DS-8104, Руководство пользователя

Страница: 20 / 55

20
Fig 4-22 alarm configuration-motion
Step2: enable motion alarm, set alarm hold time which means time interval between two adjacent detective motions. If there is other motion
detected during the interval period which is considered continuous movement; otherwise, it will be considered that those two adjacent detective
motions are two different motion events. Click Trigger button, a dialog box will pop-up:
Step3: the setup steps of motion trigger are familiar with alarm handling; user can refer to Chapter 4.5.1 Sensor
Æ alarm handling for more
details.
Step4: click Area button, a dialog box will pop-up as Fig 4-23:
Fig 4-23 motion-area
Step5: in the Area interface, user can drag slide bar to set the sensitivity value(1-8), the default value is 4. The higher the value is the higher
sensitivity you get. Due to the sensitivity is influenced by color and time (day or night), user can adjust its value according to the practical
conditions; click icon, set the whole area as detection area; click icon, the set detection area will be cleared; click icon,
user can test whether the sensitivity value and motion area are suitable accordingly
（
refer to following picture
）
; Click icon, to save the
setting; click icon, exit current interface.
Note: when user drag mouse to set motion detection area, they have to click icon to clear all set detection area firstly, and then
make the operation.
Step6: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
Step7: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface.
②
Schedule
Step1: enter into system configuration Æ alarm configuration Æ schedule; refer to Fig 4-24:
Fig3-24 alarm configuration-schedule
Step2: the setup steps of alarm schedule are familiar with schedule; user can refer to 4.4.1 Schedule for details.