HIKVISION DS-8104, Руководство пользователя

Страница: 15 / 55

15
3.3.2 Record stream
Step1: enter into system configuration Æ record configuration Æ record bit rate; refer to Fig 4-10:
Fig 4-10 record configuration-record bit rate
Step2: setup rate, resolution, quality, encode and max bit stream
Step3: user can setup all channels with same parameters, tick off “All”, then to do relevant setup.
Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface.
3.3.3 Time
Step1: enter into system configuration Æ record configuration Æ time; refer to Fig 4-12:
Fig 4-12 record configuration-time
Pre-alarm record time:
the record time before event happen i.e. record time before motion detection or sensor alarm is triggered.
Post-alarm record:
set the post recording time after the alarm is finished, five options: 10s
、
15s
、
20s
、
30s and 60s.
Expire time:
the hold time of saved records. If the set date is overdue, the record files will be deleted automatically.
Step2: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
Step3: click “default” button to resort default setting; click “apply” button to save the setting; click “exit” button to exit current interface.