HIKVISION DS-81 Series, Руководство пользователя, Страница: 46 / 94

Storage System User Manual
45
You can start and reset HYBRID SAN and create record volume.
Step:
Click the Configure HYBRID SAN button in upper right corner.
Figure 6. 4 HYBRID SAN
6.2.1 Starting HYBRID SAN
Purpose:
You can start HYBRID SAN after private volumes are created.
Before you start:
1. To create storage pool, do one of the following:

Single-HDD mode: Add HDDs to storage pool.

Array mode: Create arrays and add them to storage pool.
2. Create at least 5 LUNs. Ensure at least 4 of them are larger than 20 GB. The four LUNs are used to create
private volume, reserved volume. Other LUNs are used to create record volume.

If record volume size is fewer than 120T, then private volume 1 and private volume 2 size should both
larger 50G.

If record volume size ranges from 120T to 180T, then private volume 1 and private volume 2 size
should both larger 60G.

If record volume enlarges by 60T, record volume 1 and record volume 2 should both enlarge by 10G.
Steps:
1. Click the Configure Private Volume tab.