User Manual of Embedded Net DVR
Page
49
Total
113
5.3 Unit Name and Device ID
Unit name
In the “Display” menu:
There is an item named “Unit Name”. The default unit name is “Embedded Net DVR”. Move
“Active Frame” to unit name edit box, press EDIT key to enter into edit status, you can modify the
unit name. About how to input characters, please refer to chapter 3.4. Press ENTER key to finish
modification. Select “Confirm” button and press ENTER , you can save the new unit name and
make it into effect. Press “Cancel” button or ESC key to abort modification.
Device ID:
When you use IR controller to operate DVR, you must use device ID to select DVR. The
default device ID of DVR is “88”. If there are more than one DVR in one place, please define
different device ID for each DVR. Otherwise, the IR controller will control all DVR with the same
device ID at the same time.
In “Display” menu, move “Active Frame” to the device ID edit box, in the edit status, you can
use numeric keys to input new device ID. The device ID value is ranged among 01-100.
After you finish the modification, press “Confirm” button to save and take effect or press
“Cancel” to abort modification.
