HIKVISION DS-7604NI-SE Скачать руководство пользователя страница 117

Страница: 117 / 194

User Manual of DS-7600NI Series NVR

117

8.5

Handling Exceptions Alarm

Purpose:

Exception settings refer to the handling method of various exceptions, e.g.

•

HDD Full:

The HDD is full.

•

HDD Error:

Writing HDD error or unformatted HDD.

•

Network Disconnected:

Disconnected network cable.

•

IP Conflicted:

Duplicated IP address.

•

Illegal Login:

Incorrect user ID or password.

•

Record Exception:

No space for saving recorded files.

Steps:

Enter Exception interface of System Configuration and handle various exceptions.

Menu> Configuration> Exceptions

Please refer to

Chapter Setting Alarm Response Actions

for detailed alarm response actions.

Figure 8. 14

Exceptions Setup Interface

Содержание DS-7604NI-SE



































































































































































































Результаты поиска

Содержание DS-7604NI-SE

Отзывы:

HIKVISION DS-7604NI-SE, Руководство пользователя, Страница: 117 / 194

Результаты поиска

Содержание DS-7604NI-SE

Отзывы: