HIKVISION DS-7600NI-K1/4G Series Скачать руководство пользователя страница 102

Страница: 102 / 112

Chapter 7 Maintenance

7.1 Restore Default

Steps

1. Click at the upper-right corner.

2. Select the restoring type.

Simple Restore

Restore all parameters, except the network (including IP address, subnet mask, gateway,

MTU, NIC working mode, default route, server port, etc.) and user account parameters, to the

factory default settings.

Factory Defaults

Restore all parameters to the factory default settings.

Restore to Inactive

Restore the device to the inactive status, and leave all settings unchanged except restoring

user accounts.

3. Click Yes. The device will reboot automatically.

7.2 Search Log

The operation, alarm, exception and information of video recorder can be stored in logs, which can

be viewed and exported at any time.
Steps

1. Click at the upper-right corner.

2. Click More.

3. Click Log Information.

4. Set the search conditions.

5. Click Search.

7.3 System Service

Steps

1. Click at the upper-right corner.

2. Click More.

3. Click System Service.

4. Configure the parameters as your desire.

RTSP

You can specifically secure the stream data of live view by setting the RTSP authentication.

Network Video Recorder User Manual

Содержание DS-7600NI-K1/4G Series

















































































































Результаты поиска

Содержание DS-7600NI-K1/4G Series

Отзывы:

Бренды по названию

Популярные бренды

HIKVISION DS-7600NI-K1/4G Series, Руководство пользователя

Результаты поиска

Содержание DS-7600NI-K1/4G Series

Отзывы:

Бренды по названию

Популярные бренды