HIKVISION DS-7304HFI-SE, Руководство пользователя

Страница: 45 / 63

User Manual of DS-7304HFI-SE DVR
45
7.3 Configuring PTZ Cameras
7.3.1 Configuring Basic PTZ Settings
Settings for a PTZ camera must be configured before it can be used. Before proceeding, verify that the PTZ and RS-485 of the
DVR are connected properly.
To configure PTZ settings:
1. Enter the PTZ Configuration menu, shown in Figure 37 by going to Main Menu > System Configuration > PTZ
Configuration.
Figure 37. PTZ Configuration Menu
2. Select the Serial Settings tab.
3. Select the camera to configure in the camera drop down menu on the upper left of the menu. If all cameras are to be
configured with the same settings, select
All Cameras from the list .
4. Configure PTZ settings, including those of Baud Rate , Data Bit , Stop Bit , Parity , Flow Ctrl , Protocol and Address
according to the parameters of the PTZ camera(s).
5. Click the Save button to save current settings.
To test and verify PTZ settings:
1. Enter the PTZ Configuration menu, shown in Figure 38 by going to Main Menu > System Configuration > PTZ
Configuration.
2. Select the On Camera Settings tab. This will open up the On Camera Settings menu, shown in Figure 38.
Figure 38. PTZ Configuration
3. Select the camera to test in the camera drop down menu.