HIKVISION DS-7304HFI-SE, Руководство пользователя

Страница: 30 / 63

User Manual of DS-7304HFI-SE DVR
30
8. Select the Post-record time. The post-record time is the time in seconds to also record after a recording has ended.
9. Enter the Files Removed After time. The Files Removed After time denotes the amount of days that files will be
deleted after its initial recording. Setting the time to 0 will allow the DVR to only delete and overwrite files when the
HDD is full.
10. Repeat steps 3-9 for other Encoding Parameters mode.
11. Select the Save button to save the recording quality settings and select Exit to return to the previous menu. Selecting
the Exit button without clicking Save will quit out of the menu without saving settings.
4.1.2 Configuring a Quick Recording Schedule
A quick recording schedule allows you to set one time period per day for recording.
To setup a quick recording schedule:
1.
Enter the Quick Schedule Configuration menu, shown in Figure 21 by going to Main Menu > Recording
Configuration > Quick Schedule Configuration.
Figure 21. Quick Schedule Configuration Menu
2.
Select the camera to configure from the camera drop down menu. If all the cameras are to be configured with the
same settings, select
All Cameras
from the list.
3.
Check the
Enable
checkbox to enable the recording schedule. If the checkbox is unchecked, the recording
schedule will be disabled.
4.
Check the
24/7
checkbox if you would like to record continuously or on event for 24 hours a day, 7 days a week.
If you wish to schedule different time frames for Monday through Sunday, leave the
24/7
checkbox unchecked
and skip to step 6.
5.
Select
Recording Type
for 24/7 recording and move on to step 8. Recording type includes
Continuous
for
continuous recording or
On Event
for recording when an event is triggered (i.e. from detected motion).
6.
Select the start and stop time for each day of the week. The start and stop time are listed using a 24 hr cycle (i.e.
18:00 is equivalent to 6:00pm).
7.
Select
Recording Type
for each day of the week. Recording type includes
Continuous
for continuous recording or
On Event
for recording when an event is triggered (i.e. from detected motion) for the selected time period.
8.
Select the Save button to save the schedule settings and select Exit to return to the previous menu. Select the
Exit button without clicking Save will quit out of the menu without saving settings.
Note:
On Event recordings are recordings that are triggered from motion detection and/ or from an external alarm (See
Configuring Alarms and Exceptions on page 47).
Note:
If an event occurs during Continuous recording, the frame rate will automatically switch to that set for Event recording.
4.1.3 Configuring an Advanced Recording Schedule
An advanced recording schedule allows you to schedule multiple time periods per day for recording as oppose to a single time
period of a quick recording schedule. Setting up an advanced recording schedule will allow you to further conserve disk space by
recording only during the time periods you would like to record at.