HIKVISION DS-7300HFI-ST Series, Руководство пользователя

Страница: 67 / 84

User’s Manual of DS-7300HFI-ST Series DVR
67
Figure 54 Video Tampering Detection Menu
2.
Select the camera to setup video tampering detection in using the camera drop down menu on the
upper left of the menu. If all cameras are to be configured with the same settings, select All
Cameras from the list.
3. Click Enable Video Tampering Detection.
4. Adjust the Sensitivity for video tampering detection.
5. Using the mouse, select the region on the preview screen for where you would like to enable
video tampering detection on. Press the Clear button to clear region.
6. Select Actions to take if video tampering is detected. More than one action can be selected per
channel. These actions include:
• Sound Audio Warning: DVR will sound an audio warning if tampering is detected.
• Pop-up Image on Monitor: DVR will show the corresponding channel that is associated
with the tampered channel.
• Notify Surveillance Center: DVR will notify surveillance center when tampering is
detected.
• Send Email : DVR will send an email out to the designated recipients when tampering is
detected.
• Trigger Alarm Output: DVR will trigger alarm output when tampering is detected.
Selecting this option will enable the Alarm Output list, where the output to trigger can be
selected.
7. Select the Save button to save the privacy zones settings and select Exit to return to the previous
menu. Selecting the Exit button without clicking Save will quit out of the menu without saving
settings.
Configuring Video Loss Detection
Video loss detection can be enabled on any of the channels on your DVR to detect the loss of video.
To configure video loss detection:
1. Enter the Video Loss Detection menu, shown in Figure 55 by going to Main Menu > Camera
Setup > Video Loss Detection.