HIKVISION DS-7200HFI-SH Series, Руководство пользователя

Страница: 113 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR
112
9 . 1 Configuring G e n e ral S e tting s
Purpo s e :
Network settings must be properly configured before you operate device over network.
S t e p s :
1 .
Enter the Network Settings interface.
Menu > Configuration > Network
Figure 9. 1 General Network Settings Interface
2 .
Select the
G e n e ral
tab.
3 .
In the
G e n e ral S e tting s
interface:
You can configure the following settings: NIC Type, IPv4 Address, IPv4 Gateway, MTU and DNS
Server.
If the DHCP server is available, you can click the checkbox of
D H CP
to automatically obtain an IP
address and other network settings from that server.
No t e :
The valid value range of MTU is 500 ~ 1500.
4 .
After having configured the general settings, click the
Apply
button to save the settings.
9 . 2 Configuring Advan ce d S e tting s
9.2.1 Configuring PPPoE Settings
Purpo s e :
Your device also allows access by Point-to-Point Protocol over Ethernet (PPPoE).
S t e p s :
1 .
Enter the
N e twork S e tting s
interface.
Menu > Configuration > Network
2 .
Select the
PPPoE
tab to enter the PPPoE Settings interface.