HIKVISION DS-7200 Скачать руководство пользователя страница 54

Страница: 54 / 227

User Manual of DS-7200/7300/8100 Series DVR

3.3

Configuring Live View Settings

Purpose:

Live View settings can be customized according to different needs. You can configure the output interface,

dwell time for screen to be shown, mute or turning on the audio, the screen number for each channel, etc.

Steps:

Enter the Live View Settings interface.

Menu> Configuration> Live View

Figure 3. 9

Live View-General

The settings available in this menu include:

Video Output Interface

: Select the output to configure the settings for. The following interfaces are

selectable: VGA/HDMI, Main CVBS and Spot Output 1.

The Spot Output 1 is provided for DS-7300 and DS-8100 models.

Live View Mode:

Select different window-division mode from the drop-down list.

For the DS-7232, DS-7332 and DS-8132 models, 1/4/6/8/9/16/25/36-division window display modes are

supported; for the DS-7224, DS-7324, DS-8124 and 16-ch HDVR models, 1/4/6/8/9/16/25-division window

display modes supported; and for other models, 1/4/6/8/9/16-division window display modes are supported.

Dwell Time:

The duration

between switching of channels when enabling auto-switch in Live View.

Enable Audio Output:

Enable/disable audio output for the selected video output.



When the VGA/HDMI output interface is used as the main video output and the

Audio Output

for the

VGA/HDMI output interface is enabled, the VGA/HDMI audio and AUDIO OUT can be used for live

view, playback and two-way audio.



When the VGA/HDMI output is used as the main video output and the

Audio Output

for the

VGA/HDMI output interface is disabled, the VGA/HDMI output provides no audio and the AUDIO

OUT is used for two-way audio.



When the CVBS output is used as the main video output, the VGA/HDMI audio is provided for Aux

video output in live view, and the AUDIO OUT is used as the main video output(for live view, playback

or two-way audio).

Event Output:

Select the output to show event video. The following interfaces are selectable: VGA/HDMI,

Содержание DS-7200




































































































































































































































Результаты поиска

Содержание DS-7200

Отзывы:

Похожие инструкции для DS-7200

Бренды по названию

Популярные бренды

HIKVISION DS-7200, Руководство пользователя

Результаты поиска

Содержание DS-7200

Отзывы:

Похожие инструкции для DS-7200

Бренды по названию

Популярные бренды