HIKVISION DS-7104NI-SL Скачать руководство пользователя страница 4

Страница: 4 / 214

User Manual of Network Video Recorder

Safety Instruction

These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss.

The precaution measure is divided into “Warnings” and “Cautions”

Warnings:

Serious injury or death may occur if any of the warnings are neglected.

Cautions:

Injury or equipment damage may occur if any of the cautions are neglected.

Warnings

●

Proper configuration of all passwords and other security settings is the responsibility of the installer and/or

end-user.

●

In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation

and region. Please refer to technical specifications for detailed information.

●

Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with

100~240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications for

detailed information.

●

Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire

hazard.

●

Please make sure that the plug is firmly connected to the power socket.

If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then

please contact the service center.

Warnings

these

safeguards to prevent serious

injury or death.

Cautions

these

precautions

prevent

potential injury or material

damage.

Содержание DS-7104NI-SL























































































































































































































Результаты поиска

Содержание DS-7104NI-SL

Отзывы:

Бренды по названию

Популярные бренды

HIKVISION DS-7104NI-SL, Руководство пользователя

Результаты поиска

Содержание DS-7104NI-SL

Отзывы:

Бренды по названию

Популярные бренды