User Manual of DS-6700 Series Audio/Video Encoder
71
Time
and
End Time
of each period.
Note:
The time of each period can’t be overlapped. Up to 8 periods can be configured.
2)
Select a
Record Type
or
Capture Type
. The record/capture type can be Normal, Motion, Alarm, Motion
& Alarm, and Motion | Alarm.
Normal
If you select
Normal
, the video will be recorded / captured automatically according to the time of the
schedule.
Record/Capture Triggered by Motion Detection
If you select
Motion
, the video will be recorded / captured when the motion is detected.
Besides configuring the record/capture schedule, you have to set the motion detection area and check the
checkbox of
Trigger Channel
on the
Linkage Method
of
Motion Detection
settings interface. Refer to
the
Step 1
Set the Motion Detection Area
in the
Section 8.4.1 Configuring Motion Detection.
Record/Capture Triggered by Alarm
If you select
Alarm
, the video will be recorded / captured when the alarm is triggered.
Besides configuring the record / capture schedule, you have to set the
Alarm Type
and check the
checkbox of
Trigger Channel
on the
Linkage Method
of
Alarm Input Settings
interface.
Record/Capture Triggered by Motion & Alarm
If you select
Motion & Alarm
, the video will be recorded / captured when the motion
and
alarm are
triggered at the same time.
Besides configuring the record/capture schedule, you have to configure the settings on the
Motion
Detection
and
Alarm Input Settings
interfaces.
Record/Capture Triggered by Motion | Alarm
If you select
Motion | Alarm
, the video will be recorded/captured when the alarm is triggered or the
motion is detected.
Besides configuring the record/capture schedule, you have to configure the settings on the
Motion
Detection
and
Alarm Input Settings
interfaces.
3)
Check the checkbox of
Select All
and click
Cop
y to copy settings of this day to the whole week. You can
also check any of the checkboxes before the date and click
Copy
.
4)
Click
OK
to save the settings and exit the
Edit Schedule
interface.
7.
Click
Advanced
to configure advanced record parameters
.
Pre-Record:
The Pre-Record time can be configured as No Pre-Record, 5 s, 10 s, 15 s, 20 s, 25 s or 30 s.
Post Record:
The Post Record time can be configured as 5 s, 10 s, 30 s, 1 min, 2 min, 5 min or 10 min.
Figure 9.6 Edit Schedule
