DS-6700HUHI-K Series Encoder User Manual
37
•
NO-IP:
(1)
Enter the
Server Address
as
www.noip.com
.
(2)
Enter the
Domain
you registered.
(3)
Enter the
User Name
and
Password
.
(4)
Confirm the password.
(5)
Click Sa
ve
and then you can view the camera with the domain name.
Figure 5. 14
NO-IP Settings
Reboot the device to make the settings take effect.
5.3.4
Configuring PPPoE Settings
Your device also allows access by Point-to-Point Protocol over Ethernet (PPPoE).
Steps:
1.
Go to
Configuration >
Network > Basic Settings > PPPoE Settings
to enter the PPPoE settings page.
Figure 5. 15
PPPoE Settings
2.
Check
Enable
PPPoE
checkbox to enable this feature.
3.
Enter the
User Name
and
Password
, and confirm the password for PPPoE access.
The user name and password should be assigned by your ISP.