User Manual of Embedded Net DVS
- 6 -
Chapter 2 Installation
2.1 Hardware installation
2.1.1 Installation steps
1.
Open packing case, and check the integrity;
2.
Take out things needed during installation;
3.
Connect cables needed (video signal input cable, audio signal input cable, RS485 cable
and cable for LAN);
4.
Take out stabilizer power supply and power on.
2.1.2 Installation notice
Please read the following notice carefully. If you have any question, please
contact us.
Notice:
1.
After Opening the packing box, please check carefully to confirm that the goods in it are
consistent with list;
2.
Please read user manual carefully before installation;
3.
Please power-off all related equipments before installation;
4.
Please check the voltage of power supply to avoid voltage mismatch;
5.
Installation environmental: Do not use it under humidity and high temperature; to keep
ventilation vent freely, avoid being walled up; keep them horizontally, avoid setting up
in the vibration surroundings.
2.2 Panel description
Front panel:
