HIKVISION DS-3E15 P Series, Руководство пользователя

Страница: 10 / 26

Chapter 2 Device Management
The device can be configured and managed through iVMS-4200 software, mainly including network
parameter configuration, port configuration, link aggregation configuration, network topology
display and so on.
Note
• This chapter will briefly introduce the device management through the iVMS-4200 software. For
other functions, please refer to User Manual of iVMS-4200 Client Software.
• All pictures in this manual are for illustration only, and the specific interface is subject to the
actual interface.
2.1 Activating Devices
For the inactive devices, you are required to create a password to activate them before they can be
added to the software and work properly.
Before You Start
Make sure the device to be activated is connected to the network and is in the same subnet with
the PC running the client.
Steps
Note
This function should be supported by the device.
1. Enter the Device Management page.
2. Click Device tab on the top of the right panel.
3. Click Online Device to show the online device area at the bottom of the page.
The searched online devices are displayed in the list.
4. Check the device status (shown on Security Level column) and select an inactive device.
Figure 2-1 Online Inactive Device
5. Click Activate to open the Activation dialog.
6. Create a password in the password field, and confirm the password.
Gigabit PoE Switch Client User Manual
2