2. Weld one end of the grounding cable to the angle steel or steel
pipe and embalm the welding point via electroplating or
coating.
3. Connect the other end of the grounding cable to the grounding
terminal.
Figure 3-2 Grounding with Angle Steel
3.2 Connecting RJ45 Port
Use a network cable to connect the device to the RJ45 port of a
peer device such as network camera, NVR, switch, etc.
Figure 3-3 RJ45 Port Connection
4 Powering on the Device
Please use the attached power cord in package to power on the
device.
Before powering your switch, make sure that:
• The operating power supply is compliant with rated input
standard.
• Port cables and grounding cables are correctly connected.
• If there is outdoor cabling, connect a lightning rod and
lightening arrester to the cable.
Caution
PoE power supply line and strong wire cannot be wired together,
otherwise PD equipment or switch ports will be burnt.
4
