HIKVISION DS-2TD4166 Скачать руководство пользователя страница 122

Страница: 122 / 143

114

User Manual of Thermal Network Speed dome

7.4.2 Configuring OSD Settings

Purpose:

The speed dome supports following on screen displays:

Time: Supports for time display.

Camera Name: Identifies the name of speed dome.

You can customize the on screen display of time.

Steps:

Enter the OSD settings interface:
Configuration > Image > OSD Settings

Select the channel No..

Figure 7-52 OSD Settings

Check the corresponding checkbox to select the display of speed dome name, date or
week if required.

Edit the speed dome name in the text field of Camera Name.

Select from the dropdown list to set the time format, date format, display mode, OSD
size and Font color.

You can use the mouse to click and drag the text frame

IPdome

in the live view window

to adjust the OSD position.

Available from A1 Security Cameras

www.a1securitycameras.com email: [email protected]

Содержание DS-2TD4166
















































































































































Результаты поиска

Содержание DS-2TD4166

Отзывы:

HIKVISION DS-2TD4166, Руководство пользователя, Страница: 122 / 143

Результаты поиска

Содержание DS-2TD4166

Отзывы: