Optical Bi-spectrum Network Speed Dome
·
Quick Start Guide
7
3
Setting the Dome over the LAN
3.1
Wiring
To view and configure the speed dome via LAN (Local Area Network), you need to
connect the network speed dome in the same subnet with your PC. Then, install the
SADP or client software to search and change the IP of network speed dome.
The following figure shows the cable connection of network speed dome.
Network
Speed Dome
Switch
Internet
NVR
PC
Figure 3-1
Wiring over LAN
3.2
Activating the Speed Dome
Purpose:
You are required to activate the speed dome first by setting a strong password for it
before you can use the speed dome.
Activation via Web Browser, Activation via SADP, and Activation via client software are
supported. In the following sections, activation via web browser and SADP will be taken
as examples. You may refer to the user manual of the speed dome for the details of
activation via client software.
3.2.1
Activation via Web Browser
Steps:
1.
Power on the speed dome, and connect the speed dome to the network.
2.
Input the IP address into the address bar of the web browser, and click Enter to enter
the activation interface.
The default IP address of the speed dome is 192.168.1.64.
Содержание DS-2TD4035D-25(50)
Страница 1: ...UD 6L0201B2060A01 Thermal Optical Bi spectrum Network Speed Dome Quick Start Guide ...
Страница 19: ......