User Manual of Explosion-proof Dome
© Hikvision
36
Figure 5-4
Segment Snapshot Settings
6.
Click
to enter the advanced setting interface. You can select the stream type of
the capture.
7.
Click
to enter the Capture Parameters Interface.
8.
Check the
Enable Timing Snapshot
checkbox to enable continuous snapshot, and configure
the schedule of timing snapshot. Check the
Enable Event-triggered Snapshot
checkbox to
enable event-triggered snapshot.
9.
Select the format, resolution, quality of the snapshot.
10.
Set the time interval between two snapshots.
11.
Click
to save the settings.
Uploading to FTP
Make sure that the FTP server is online.
You can follow below configuration instructions to upload the snapshots to FTP.
Upload continuous snapshots to FTP
Steps:
1)
Configure the FTP settings and check
Upload Picture
checkbox in FTP Settings interface.
Refer to
Section Configuring FTP Settings
for more details to configure FTP parameters.
2)
Check the
Enable Timing Snapshot
checkbox.
3)
Click
Edit
to set the snapshot schedule. Refer to
Section 5.2.1 Configuring Motion
Upload event-triggered snapshots to FTP
Steps:
1)
Configure the FTP settings and check
Upload Picture
checkbox in FTP Settings interface.
Refer to
Section 6.1.2 Configuring FTP Settings
for more details to configure FTP parameters.
2)
Check
Upload to FTP
checkbox in Motion Detection Settings or Alarm Input interface. Refer
to
Section 5.2.1 Configuring Motion Detection
3)
Check the
Enable Event-triggered Snapshot
checkbox.
5.1.3
Configuring Net HDD
Before you start:
Содержание DS-2DF6236-CX
Страница 1: ...Explosion proof Dome User Manual...
Страница 116: ...User Manual of Explosion proof Dome Hikvision 109 Figure A 1 2 Modify Network Parameters...
Страница 117: ...UD06978B...