HIKVISION DS-2DE4582AE, Руководство пользователя, Страница: 32 / 101

User Manual of Network Speed Dome
© Hikvision
31
5.2 Configuring Basic PTZ Parameters
Purpose:
You can configure the basic PTZ parameters, including proportional pan, preset
freezing, preset speed, etc.
1.
Enter the Basic PTZ Parameter Configuration interface:
Configuration > Advanced Configuration > PTZ > Basic
Figure 5-2 Basic PTZ Configuration Interface
2. Configure the following settings:

Basic Parameters: Enable/disable proportional pan and preset freezing, set the
preset speed, keyboard control speed, and auto scan speed.

Proportional Pan: If you enable this function, the pan/tilt speeds change
according to the amount of zoom. When there is a large amount of zoom, the
pan/tilt speed will be slower for keeping the image from moving too fast on
the live view image.

Preset Speed: You can set the speed of a defined preset from 1 to 8.

Keyboard Control Speed: Define the speed of PTZ control by a keyboard as
Low, Normal or High.

Auto Scan Speed: The dome provides 5 scan modes: auto scan, tilt scan,
frame scan, random scan and panorama scan. The scan speed can be set from
level 1 to 40.

Max . Tilt-angle : The Max. angle that the speed dome can revolve in the tilt
direction is adjustable. The values are (0-90), (-1-90), (-2-90), (-3-90), (-4-90)
and (-5-90).
The angle range varies depending on the models of speed dome.

Auto Flip : You can enable/disable the auto flip function.