HIKVISION DS-2DE4582AE Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 101

HIKVISION DS-2DE4582AE Скачать руководство пользователя страница 2

User Manual of Network Speed Dome

© Hikvision

1

Thank you for purchasing our product. If there are any questions, or requests, please
do not hesitate to contact the dealer.
This manual applies to Network Speed Dome.
This  manual  may  contain  several  technical  or  printing  errors,  and  the  content  is
subject to  change  without  notice.  The updates will  be  added to  the  new  version  of
this  manual.  The  pictures  in  the  manual  are  for  reference  only.  We  will  readily
improve or update the products or procedures described in the manual.

DISCLAIMER STATEMENT

“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability
of the security or signaling aspects of this product. UL has only tested for fire, shock
or  casualty  hazards  as  outlined  in  UL’s  Standard(s)  for  Safety,  UL60950-1.  UL
Certification does not cover the performance or reliability of the security or signaling
aspects  of  this  product.  UL  MAKES  NO  REPRESENTATIONS,  WARRANTIES  OR
CERTIFICATIONS  WHATSOEVER  REGARDING  THE  PERFORMANCE  OR  RELIABILITY  OF
ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.”

0501011040110

«
1
2
3
4
...
»

Содержание DS-2DE4582AE






































































































Отзывы:

Нет отзывов