The sensor may be burned out by a laser beam, so
when any laser equipment is in using, make sure that
the surface of sensor will not be exposed to the laser
beam.
Do not expose the device to high electromagnetic
radiation or extremely hot, cold, dusty or damp
environment.
To avoid heat accumulation, good ventilation is
required for the operating environment.
Keep the camera away from liquid while in use for
non-water-proof device.
While in delivery, the camera shall be packed in its
original packing, or packing of the same texture.
Mark Description
Table 0-1 Mark Description
Mark
Description
DC Voltage
1
Introduction
1.1
Main Features
1.1.1
Type I Camera
High performance CMOS sensor
Low illumination, 0.0005 Lux @ (F1.0, AGC ON), 0 Lux
with white light
24/7 Color Imaging
OSD menu with configurable parameters
Auto white balance
SMART Light
2-axis adjustment
1.1.2
Type II Camera
High performance CMOS sensor
Low illumination, 0.01 Lux @ (F1.2, AGC ON), 0 Lux
with IR
IR cut filter
Support white and IR supplement light
OSD menu with configurable parameters
Auto white balance
SMART IR
2-axis adjustment
1.2
Overview
Power Cord
Video Output
Lens
Microphone
Supplement Light
Figure 1-1
Overview of the Camera
