CONTRAST
This feature enhances the difference in color and light
between parts of an image. You can set the CONTRAST
value from 1 to 9.
SHARPNESS
Sharpness determines the amount of detail an imaging
system can reproduce. You can set the SHARPNESS
value from 1 to 9.
SATURATION
Adjust this feature to change the saturation of the color.
The value ranges from 1 to 9.
3DNR (Digital Noise Reduction)
The 3DNR function can decrease the noise effect,
especially when capturing moving images in poor light
conditions and delivering more accurate and sharp
image. You can set the 3DNR value from 1 to 9.
Note:
3DNR is only supported by Type I camera.
DNR (Digital Noise Reduction)
DNR refers to digital noise reduction.
This function
reduces noise in video stream.
Note:
DNR is only supported by Type II camera.
MIRROR
OFF, H, V, and HV are selectable for mirror.
OFF: The mirror function is disabled.
H: The image flips 180° horizontally.
V: The image flips 180° vertically.
HV: The image flips 180° both horizontally and
vertically.
3.6
AUDIO SETTINGS
AUDIO
Under the AUTO SETTINGS sub-menu, you can set the
mode to ON or OFF.
VOLUME
Adjust the LEVEL to a higher value to raise the volume.
3.7
FUNCTIONS
Note:
FUNCTIONS is only supported by Type I.
MOTION DET
In the user-defined motion detection surveillance area,
the moving object can be detected and the alarm will
be triggered. Up to 4 motion detection areas can be
configured.
Select a MOTION area. Set the MODE to ON. Click the
up/down/left/right button to define the position, and
the size of the area. Set the SENSITIVITY from 1 to 9.
PRIVACY
The privacy mask allows you to cover certain areas
which you don’t want to be viewed, or recorded. Up to
4 privacy areas are configurable.
Select a PRIVACY area. Set the MODE to ON. Click
up/down/left/right button to define the position, and
the size of the area.
3.8
FACTORY DEFAULT
Reset all the settings to the factory default.
3.9
EXIT
Move the cursor to EXIT and click Iris+ to exit the menu.
