HIKVISION DS-2CC 2D9T Series, Руководство пользователя

Страница: 5 / 50

4
 Do not connect several devices to one power adapter as
adapter overload may cause over-heating or a fire hazard.
 Make sure that the plug is firmly connected to the power
socket.
 When the product is mounted on wall or ceiling, the device
shall be firmly fixed.
 If smoke, odor or noise rise from the device, turn off the power
at once and unplug the power cable, and then contact the
service center.
 If the product does not work properly, contact your dealer or
the nearest service center. Never attempt to disassemble the
camera yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
Cautions
 Make sure the power supply voltage is correct before using the
camera.
 Do not drop the camera or subject it to physical shock.
 Do not touch senor modules with fingers. If cleaning is
necessary, use clean cloth with a bit of ethanol and wipe it
gently. If the camera will not be used for an extended period,
replace the lens cap to protect the sensor from dirt.
 Do not aim the camera at the sun or extra bright places.
Blooming or smearing may occur otherwise (which is not a
malfunction), and affect the endurance of sensor at the same
time.
 The sensor may be burned out by a laser beam, so when any
laser equipment is in using, make sure that the surface of
sensor will not be exposed to the laser beam.