User Manual of Network Mini PTZ Camera
© Hikvision
88
Figure 7-49
Configuring Intrusion Area
3.
The event triggered and park action related PTZ movement will be locked for 180
seconds after you enter the intrusion detection interface. Optionally, you can
click the
button to manually activate the movement, or lock the
movement when the button turns to
by clicking it.
4.
Draw area.
(1)
Select the Region No.in dropdown list.
(2)
Click
to draw a rectangle on the image as a defense region.
(3)
Click on the image to specify a corner of the rectangle, and right-click the
mouse after four corners are configured.
Up to four areas are supported.
You can click
to clear the areas you drawn.
5.
Configure the parameters for each defense region separately.
Threshold:
Range [0-10s], the threshold for the time of the object loitering in
the region. If you set the value as 0, alarm is triggered immediately after the
object entering the region.
Sensitivity:
Range [1-100]. The value of the sensitivity defines the size of the
object which can trigger the alarm, when the sensitivity is high, a very small
object can trigger the alarm.
6.
Click
to edit the arming schedule for tampering. The arming schedule
