User Manual of Network Mini PTZ Camera
© Hikvision
47
The PTZ camera can be controlled by network and RS-485 signals. You can set
the control priority of these two signals.
The operation of
Operator
is prior to that of
User
. When the
Operator
is
controlling the PTZ camera, the
User
cannot control it. When the
Operator
finishes, the
User
can control the PTZ camera after the
Delay
time. The
Delay
time can be set in Priority PTZ interface as shown follows.
Figure 6-9
PTZ Priority
2.
Click
to activate the settings.
6.8
Clearing PTZ Configurations
Purpose:
You can clear PTZ configurations in this interface, including all presets, privacy masks,
PTZ limits, scheduled tasks and park actions.
Steps:
1.
Enter the Clearing Configuration interface:
Configuration > Advanced Configuration> PTZ > Clear Config
2.
Check the checkbox of the items you want to clear.
3.
Click
to clear the settings.
