Video Wall Controller • User Manual
4
Chapter 3 Web Configuration
Log in to the Web
After the device is activated, enter the IP address of the device in the browser. Enter the account
number and the password to log in to the Web of the device. The account number is admin and the
password is the activation password. The Web is used to configure the signal source, network,
system and other parameters of the device.
Configure Decoding Output
Introduces the parameter configuration of the output channels.
Configure Signal Cable
Configure the signal connection of the sending card and the receiving card between different
cabinets based on the site conditions.
Enter Video Wall Configuration
→
Decoding Output. Select LED sending card in the Output List
(Example of naming the LED sending card: LEDSendCard_Board19_1). Right-click and select Signal
Cable Configuration.
Configure parameters of display screen. Click OK after completion.
Display Screen (Row X Column)
：
Set the number according to the number and layout of the
cabinets on site (devices installed with the receiving card and the screen).
Custom Screen Resolution: It refers to the screen resolution of spliced cabinets. The resolution
should be consistent with display image. Otherwise, there may be problems such as
incomplete screen display, inconsistencies in brightness and color, etc.
Set Receiving Card Layout and Resolution
Click Signal Cable Configuration. The connection of the signal cable should be consistent with that
of the cabinet screen.
1.
Click the sending port of the sending card on the left.