HIKVISION 5 Inch Network High Speed Dome, Руководство по установке, Страница: 15 / 53

5 Inch Speed Dome Installation Manual V2.0.0
14
Note:
for outdoor applications, please apply the thread compound and the damp-proof stopper to threads of the back box and the
mount.
After having made connections of the power cord, video cable, RS-485 control line and alarm input/output lines (if required), close the
hinged door and tighten the set screws, as shown in Figure 1.2.15.
6.
Install the dome drive
As shown in Figure 1.2.16, align the tabs on both sides of the dome drive with the corresponding arrow labels on the back box to snap
the drive into the back box firmly.
Figure 1.2.16 Install Dome Drive
7. Install the bubble and fasten the two set screws on both sides, as shown in Figure 1.2.17.
Figure 1.2.17 Install Bubble
1.3
Initial Settings
Address code: 0
Baud rate: 2400
120 Ω terminator: OFF