HIKOKI SB 8V2, Инструкция по эксплуатации

Страница: 8 / 56

7
English
on this tool should ONLY be performed by a
HiKOKI
Authorized Service Center.
5.
Replacing supply cord
If the supply cord of Tool is damaged, the Tool
must be returned to
HiKOKI
Authorized Service
Center for the cord to be replaced.
6.
Service parts list
CAUTION:
Repair, modification and inspection of
HiKOKI
Power
Tools must be carried out by a
HiKOKI
Authorized
Service Center.
This Parts List will be helpful if presented with the
tool to the
HiKOKI
Authorized Service Center when
requesting repair or other maintenance.
In the operation and maintenance of power tools,
the safety regulations and standards prescribed in
each country must be observed.
MODIFICATIONS:
HiKOKI
Power Tools are constantly being improved
and modified to incorporate the latest technological
advancements.
Accordingly, some parts may be changed without
prior notice.
GUARANTEE
We guarantee
HiKOKI
Power Tools in accordance with
statutory/country specific regulation. This guarantee does
not cover defects or damage due to misuse, abuse, or
normal wear and tear. In case of complaint, please send
the Power Tool, undismantled, with the GUARANTEE
CERTIFICATE found at the end of this Handling
instruction, to a
HiKOKI
Authorized Service Center.
NOTE:
Due
HiKOKI
’s continuing program of research and
development, the specifications herein are subject to
change without prior notice.
Information concerning airborne noise and vibration
The measured values were determined according to
EN60745 and declared in accordance with ISO 4871.
The typical A-weighted sound power level: 101 dB (A).
The typical A-weighted sound pressure level: 90 dB (A).
Uncertainty KpA: 3 dB (A).
Wear hearing protection.
Vibration total values (triax vector sum) determined
according to EN60745.
Sanding steel plate:
Vibration emission value
a
h = 2.2 m/s
2
Uncertainty K = 1.5 m/s
2
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another.
It may also be used in a preliminary assessment of
exposure.
WARNING
䡬
The vibration emission during actual use of the
power tool can differ from the declared total value
depending on the ways in which the tool is used.
䡬
Identify safety measures to protect the operator that
are based on an estimation of exposure in the
actual conditions of use (taking account of all parts
of the operating cycle such as the times when the
tool is switched off and when it is running idle in
addition to the trigger time).
01Eng_SB8V2_EE 12/13/12, 16:06 7