background image

10

  Make sure that any swarf and dust falling on the power 

tool during work do not collect on the battery.

  Do not store an unused battery in a location exposed to 

swarf and dust.

  Before storing a battery, remove any swarf and dust that 

may adhere to it and do not store it together with metal 

parts (screws, nails, etc.).

2.  Do not pierce battery with a sharp object such as a 

nail, strike with a hammer, step on, throw or subject the 

battery to severe physical shock.

3.  Do not use an apparently damaged or deformed battery.

4.  Do not use the battery in reverse polarity.

5.  Do not connect directly to an electrical outlets or car 

cigarette lighter sockets.

6.  Do not use the battery for a purpose other than those 

speci

fi

 ed.

7.  If the battery charging fails to complete even when a 

speci

fi

 ed recharging time has elapsed, immediately stop 

further recharging.

8.  Do not put or subject the battery to high temperatures or 

high pressure such as into a microwave oven, dryer, or 

high pressure container.

9.  Keep away from 

fi

 re immediately when leakage or foul 

odor are detected.

10. Do not use in a location where strong static electricity 

generates.

11. If there is battery leakage, foul odor, heat generated, 

discolored or deformed, or in any way appears abnormal 

during use, recharging or storage, immediately remove it 

from the equipment or battery charger, and stop use.

12. Do not immerse the battery or allow any 

fl

 uids  to 

fl

 ow 

inside. Conductive liquid ingress, such as water, can 

cause damage resulting in 

fi

 re or explosion. Store your 

battery in a cool, dry place, away from combustible and 

fl

 ammable items. Corrosive gas atmospheres must be 

avoided.

CAUTION

1.  If liquid leaking from the battery gets into your eyes, 

do not rub your eyes and wash them well with fresh 

clean water such as tap water and contact a doctor 

immediately.

 

If left untreated, the liquid may cause eye-problems.

2.  If liquid leaks onto your skin or clothes, wash well with 

clean water such as tap water immediately.

 

There is a possibility that this can cause skin irritation.

3. If you 

fi

 nd rust, foul odor, overheating, discolor, 

deformation, and/or other irregularities when using the 

battery for the 

fi

 rst time, do not use and return it to your 

supplier or vendor.

WARNING

If a conductive foreign matter enters in the terminal of lithium 

ion battery, the battery may be shorted, causing 

fi

 re. When 

storing the lithium ion battery, obey surely the rules of 

following contents.

  Do not place conductive debris, nail and wires such as 

iron wire and copper wire in the storage case.

  To prevent shorting from occurring, load the battery in 

the tool or insert securely the battery cover for storing 

until the ventilator is not seen.

REGARDING LITHIUM-ION BATTERY 

TRANSPORTATION

When transporting a lithium-ion battery, please observe the 

following precautions.

WARNING

Notify the transporting company that a package contains a 

lithium-ion battery, inform the company of its power output 

and follow the instructions of the transportation company 

when arranging transport.

  Lithium-ion batteries that exceed a power output of 

100Wh are considered to be in the freight classi

fi

 cation 

of Dangerous Goods and will require special application 

procedures.

 For transportation abroad, you must comply with 

international law and the rules and regulations of the 

destination country.

Wh

Power Output

2 to 3 digit number

USB DEVICE CONNECTION 

PRECAUTIONS (UC18YSL3)

When an unexpected problem occurs, the data in a USB 

device connected to this product may be corrupted or lost. 

Always make sure to back up any data contained in the USB 

device prior to use with this product.

Please be aware that our company accepts absolutely no 

responsibility for any data stored in a USB device that is 

corrupted or lost, nor for any damage that may occur to a 

connected device.

WARNING

  Prior to use, check the connecting USB cable for any 

defect or damage.

  Using a defective or damaged USB cable can cause 

smoke emission or ignition.

  When the product is not being used, cover the USB port 

with the rubber cover.

  Buildup of dust etc. in the USB port can cause smoke 

emission or ignition.

NOTE

 There may be an occasional pause during USB 

recharging.

  When a USB device is not being charged, remove the 

USB device from the charger.

  Failure to do so may not only reduce the battery life 

of a USB device, but may also result in unexpected 

accidents. 

  It may not be possible to charge some USB devices, 

depending on the type of device.

000Book̲G3613DA̲AUST.indb   10

000Book̲G3613DA̲AUST.indb   10

2020/11/24   15:56:22

2020/11/24   15:56:22

Содержание G 3613DA





















Отзывы: