HIKOKI C 3607DRA, Инструкция по эксплуатации

Страница: 21 / 36

21
SPECIFICATIONS
1. Power tool
Max. Cutting
Capacity
Height × Width
0° 58 mm × 310 mm
Miter 45° 58 mm × 218 mm
Bevel
Left 45° 39 mm × 310 mm
Right 45° 16 mm × 310 mm
Compound
Bevel (Left) 45° + Miter (Left) 45° 39 mm × 218 mm
Bevel (Left) 45° + Miter (Right) 45° 39 mm × 218 mm
Bevel (Right) 45° + Miter (Right) 45° 16 mm × 218 mm
Bevel (Right) 45° + Miter (Left) 31° 16 mm × 258 mm
Saw Blade Dimensions (oD × iD × Thickness) 185 mm × 20 mm × 2 mm
Miter Cutting Angle Right 0° – 57°, Left 0° – 45°
Bevel Cutting Angle Right 0° – 45°, Left 0° – 45°
Compound Cutting Angle
Bevel (Left) 0° – 45° Miter (Left) 0° – 45°, (Right) 0° – 45°
Bevel (Right) 0° – 45° Miter (Right) 0° – 45°, (Left) 0° – 31°
Voltage 36 V
No-Load Speed 4000 /min
Machine Dimensions (Width × Depth × Height) 830 mm × 780 mm × 484 mm
Battery available for this tool* Multi volt battery
Weight** 15.4 kg
Laser Marker
Maximum output Po<0.4 mW Class 1M Laser Product
(Iambda) 650 nm
Laser medium Laser Diode
* Existing batteries (BSL3660/3620/3626, BSL18....
series, etc.) cannot be used with this tool.
** According to EPTA-Procedure 01/2014
Depending on attached battery.
The heaviest weight is measured with BSL36B18 (sold
separately).
NOTE
Due to HiKOKI’s continuing program of research and
development, the speci fi cations herein are subject to
change without prior notice.
2. Battery
Model BSL36A18 BSL36B18
Voltage 36 V / 18 V (Automatic Switching*)
Battery capacity
2.5 Ah / 5.0 Ah
(Automatic
Switching*)
4.0 Ah / 8.0 Ah
(Automatic
Switching*)
Available cordless
products**
Multi volt series, 18 V product
Available charger
Sliding charger for lithium ion
batteries
* The tool itself will automatically switch over.
** Please see our general catalogue for details.
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 31.
Standard accessories are subject to change without notice.
APPLICATION
Cutting various types of wood.
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger’s power cord to the receptacle.
When connecting the plug of the charger to a receptacle,
the charge indicator lamp will blink in red (At 1- second
intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger as shown in
Fig. 2 (on page 3).
3. Charging
When inserting a battery in the charger, the charge
indicator lamp will blink in blue.
When the battery becomes fully recharged, the charge
indicator lamp will light up in green. (See Table 1 )
(1) Charge indicator lamp indication
The indications of the charge indicator lamp will be as
shown in Table 1 , according to the condition of the
charger or the rechargeable battery.
00Book̲C3607DRA̲AUST.indb 21 00Book̲C3607DRA̲AUST.indb 21 2018/12/20 10:14:51 2018/12/20 10:14:51