Thermal Image Scope User Manual
5
Auto Power Off
You can set the auto power off time for your device.
Steps
1. Hold the wheel to go to the menu.
2. Rotate the wheel to select
, and press the wheel to select the auto power off time as
required.
3. Hold the wheel to save and exit.
Note
●
See the battery icon for the electricity quantity.
means the battery is fully charged, and
means that the battery is low.
●
When the low power note shows, charge the battery.
2.4 Menu Description
When the device is turned on, hold the wheel to show the menu.
In the menu, you can rotate the wheel to select functions, press the wheel to configure the selected
function, and hold the wheel to exit the menu.
Figure 2-5 Menu Interface
2.5 Firmware Status
2.5.1 Client Software Connection
Connect the device to the HIKMICRO Sight app via hotspot, and then you can capture picture,