background image

TROUBLESHOOTING

11

Water is not flowing 

through the shower head.

• Make sure the appliance is switched on.

• Make sure there is sufficient water available.

• Make sure the pump fuse is not blown.

• Make sure that adequate DC power is available.

• Make sure the DC fuse in the cigarette lighter fitting is not blown.

• Check that the shower flow switch is in the “on” position.

• Make sure the DC fuse in the cigarette lighter fitting is not blown.

• Make sure that adequate DC power is available.

• Check if the battery requires recharging.

• Check that the gas cylinder is turned on and that there is gas in     

   the cylinder.

• Make sure water is flowing from the shower head.

• Check that the water is not too hot.

• Check gas Temperature Control is set on MAX.

• Check source water temperature.

• Recycle the water through the device back into the source 

   reservoir and through the appliance again.

• Check gas Temperature Control is set on MIN.

• Check source water temperature.

• Make sure the water flow on the shower head is set to the outer ring.

• Check the water restrictor plug fitted inside the shower head 

   handle. Remove the hose connection and pull out the plug. 

   Retain the plug and refit it if needed.

Device does not power on.

The burner will not light.

Water is not hot enough.

Water is too hot.

Issues

Solutions

Do not use AC to DC converters or modify the supplied adaptors.

If the appliance is not being regularly used, recharge the device every three (3) months to guarantee 

battery life. Failure to do so may result in battery failure.

Expected charging time:

25% - 1 hour

50% - 2 hours

100% - 4-5 hours

To keep battery in the best condition, it is recommended to allow the device to charge to 100%.

Содержание HICPSBT















Отзывы: