HighLine NT Rockpicker NT60E, Руководство оператора

Страница: 24 / 79

Section 2 - Transporting the Rockpicker
Raise the Pickup Apron
216075-1C
Connect Breakaway Chain to the Tractor
(Guard Removed for Clarity)
217214C
6. Connect the hydraulic hoses.
- One set of hydraulic hoses is used for
adjusting the collecting apron height
and dumping the bucket when full of
rocks.
- The second set of hoses is used to
drive the rock picker reel motor.
- The third set is for the hitch hydraulic
cylinder.
7. Connect the electrical connection for the
signal lights.
8. Connect the rockpicker brake line (1) to
the tractor.
9. Connect the emergency break away
chain (2) to the tractor.
Accumulators contain high
pressure hydraulic fluid which
may cause serious injury.
- This chain will activate the
rockpicker brakes if the rockpicker
should become disconnected from
the tractor.
- Ensure there is enough chain
slack to allow turning the machine
without activating the break away
system.
10. Fully raise the pickup apron.
- Fully retract the bucket dump
cylinders (3) to raise the apron.
- As the cylinders retract, they will raise
the apron from the ground surface.
Connect Hydraulic Hoses & Electrical
108008
Page 2-3