Highlight MAGNUM 1300 TB-U, Руководство по эксплуатации

Страница: 19 / 53

4. Tighten the retaining nuts.
5. From the opposite side of the control panel, thread the tape through the
rollers according to the tape-threading diagram.
6. If the tape is not quite centered on the bass knurled roller as you pull the
tape through, loosen the retaining nut a few turns again. Turning the roll
of tape and the spindle clockwise will move the tape toward the controls
side; turning it counter-clockwise will move the tape toward the opposite
of the control panel.
7. When finished adjusting, tighten the retaining nut and check how the tape
moves through the rollers.
B. Checking the tape tension
The tape friction is preset to normal operation. Tape tension can be increased or
decreased as desired. Increase tension by turning the locking nut on the shaft
clockwise; decrease tension by turning counter-clockwise. Too much braking
force applied to the tape will cause poor tape application and may lead to tape
tabbing on the trailing tape leg.