| 5
REAR PANEL CONNECTIONS
The rear panel features XLR INPUT and OUTPUT connectors for the LEFT and RIGHT channels.
These connections have been wired PIN 2 HOT to conform with AES standards.
NOTE: To run in unbalanced mode, ensure your unbalanced cable ties pin 3 to pin 1 at the cable.
The AC INPUT connection is a typical 3 pin IEC power cable. You must use the correct fuse value
and ensure the internal voltage selector meets the requirements for your region.
PLEASE REFER TO THE VOLTAGE SELECTION AND FUSE SECTION ON PAGE 2 PRIOR TO
POWERING YOUR UNIT.
front PANEL CONTROLS
The front panel features five (5) fixed frequency controls for each band. A separate
PRESENCE
FILTER
control, consisting of an additive-only gain control and a six (6) step frequency selector.
The
IN
illuminated push button, when pushed in, will engage both channels simultaneously.
When this push button is out and non-illuminated, both channels will be disengaged and will
perform a true bypass of the equipment.
The
POWER
illuminated push button, when pushed in, will power the unit ready for use. When
this push button is out and non-illuminated, the equipment is in a powered down state.
RIGHT CHANNEL
LEFT CHANNEL
OUTPUT
OUTPUT
INPUT
INPUT
AC INPUT
F
CAUTION: HIGH
g
VOLTAGE
!
RISK OF ELECTRIC SHOCK
!! WARNING !!
SET AC VOLTAGE SELECTION INSIDE BEFORE USE
40 Hz
160 Hz
2k5 Hz
IN
POWER
650 Hz
FREQUENCY
GAIN
EQ-6S
STEREO
EQUALIZER
6-BAND STEREO EQUALIZER
HIGH
g
VOLTAGE
A U D I O
SUB
PRESENCE FILTER
-5
-3
0
-2
-1
-4
5
3
2
1
4
OFF
10k
2k5
5k
40k
20k
Hz
-5
-3
0
-2
-1
-4
5
3
2
1
4
-5
-3
0
-2
-1
-4
5
3
2
1
4
-5
-3
0
-2
-1
-4
5
3
2
1
4
-5
-3
0
-2
-1
-4
5
3
2
1
4
0
2
5
3
4
1
10
8
7
6
9
